Ref
M300 - 300 watt mono block amplifier
£799.00
free
P&P in UK
If you wish to buy online click
here where the transaction will be carried out via Paypal
Merchant Services at our mother site www.highendcable.co.uk. Any
queries call Dave on 01775 761880
Bel Canto Packages
M300 Mono Audio Power Amplifier
The audio amplifier is the engine of the audio system. It must
provide the power to drive the loudspeaker motor. The amplifier
has huge power gain: from micro-watts of input power to 100’s
of watts of output power the audio amplifier must do its job with
ease and competence.
Key
issues that must be addressed in a high performance audio amplifier
are:
Power
supply design defines the performance limit of the amplifier,
fully regulated power supplies provide the standard for fidelity.
True balanced operation improves the signal fidelity under load.
Balanced input insures that the large output/input power ratio
does not corrupt the input signal fidelity. Low output stage impedance,
especially at low frequencies, insures maximum control of the
loudspeaker driver. Comprehensive protection circuit that is outside
the signal path is critical to protecting both the amplifier and
loudspeaker.
A short, simple, signal path with a minimum of output devices
leads to a better audio performance. All of the Bel Canto e.One
amplifiers are designed to optimize performance of all of these
criteria. The M300 provides ground breaking performance in a compact,
true mono chassis design with 300 watts of power. The M300 amplifier
channel has its own fully regulated switching power supply, true
balanced operation, 4 ohm drive capability and 111dB of dynamic
range.
M300
amplifiers in your system will sound like you are connected directly
to the music source, the loudspeaker and amplifier effectively
disappear in the large and compelling sonic picture. Fidelity
and signal clarity is unmatched from the lowest audio frequencies
through to the sweetest high frequencies. The utter mid-range
clarity especially allows the music to communicate as never before.
Discover
what this remarkable amplifier technology can do for your audio
system.
e.One
M300 Specifications
Power Output: 300W into 4 ohms, 150W
into 8 ohms
Minimum Load: 4 ohms
Frequency Response: +/-0.5dB 20Hz-20KHz,
all loads
THD+N: 0.01%, 1W, 1KHz, 4 ohms
IMD (CCIF): 0.002%, 1W, 14:15KHz,
4 ohms
Output noise: 90uVRMS A-weighted
10Hz-20KHz
Voltage gain: 27dB (single ended
or balanced input)
Damping factor: >1000
Output Impedance at 100Hz <8 milliohms
Dynamic Range: 111dB
Input Voltage for Max Output 1.5Vrms
Input connections: Single-ended RCA
or balanced XLR
RCA input impedance: 10Kohms
Balanced input impedance: 20Kohms
Output connections: WBT 5-way safety
binding posts
Standby Power: 5W
Size: 8.5”x3”x12”,
216mmx76x305mm (WxHxD)
Weight: 9lbs, 4Kg
Features and specifications are subject to improvements and changes
without prior notice
