e.100
S300 300 watt Dual Mono Audio Power Amplifier
£1,199.00
free
P&P in UK
If you wish to buy online click
here where the transaction will be carried out via Paypal
Merchant Services at our mother site www.highendcable.co.uk. Any
queries call Dave on 01775 761880
Bel Canto Packages
The audio amplifier is the engine of the audio system. It must
provide the power to drive the loudspeaker motor. The amplifier
has huge power gain: from micro-watts of input power to 100’s
of watts of output power the audio amplifier must do its job with
ease and competence.
Key
issues that must be addressed in a high performance audio amplifier
are:
Power
supply design defines the performance limit of the amplifier,
fully regulated power supplies provide the standard for fidelity.
True balanced operation improves the signal fidelity under load.
Balanced input insures that the large output/input power ratio
does not corrupt the input signal fidelity. Low output stage impedance,
especially at low frequencies, insures maximum control of the
loudspeaker driver. Comprehensive protection circuit that is outside
the signal path is critical to protecting both the amplifier and
loudspeaker. A short, simple, signal path with a minimum of output
devices leads to a better audio performance. All of the Bel Canto
e.One amplifiers are designed to optimize performance of all of
these criteria. The S300 provides ground breaking performance
in a compact, dual mono chassis design able to supply 300 Watts
of power. Each S300 amplifier channel has its own fully regulated
switching power supply, true balanced operation, 4 ohm drive capability
and 111dB of dynamic range.
With
the S300 in your system it will sound like you are connected directly
to the music source, the loudspeaker and amplifier effectively
disappear in the large and compelling sonic picture. Fidelity
and signal clarity is unmatched from the lowest audio frequencies
through to the sweetest high frequencies. The utter mid-range
clarity especially allows the music to communicate as never before.
Discover
what this remarkable amplifier technology can do for your audio
system.
e.One
S300 Specifications
Power Output: 300W/channel into 4
ohms, 150W/channel into 8 ohms
Minimum Load: 4 ohms
Frequency Response: +/-0.5dB 20Hz-20KHz,
all loads
THD+N: 0.01%, 1W, 1KHz, 4 ohms
IMD (CCIF): 0.002%, 1W, 14:15KHz,
4 ohms
Output noise: 90uVRMS A-weighted
10Hz-20KHz
Voltage gain: 27dB (single ended
or balanced input)
Damping factor: >1000
Output Impedance at 100Hz <8 milliohms
Dynamic Range: 111dB
Input Voltage for Max Output 1.5Vrms
Input connections: Single-ended RCA
or balanced XLR
RCA input impedance: 10Kohms
Balanced input impedance: 20Kohms
Output connections: 2-sets WBT 5-way
safety binding posts
Standby Power: 10W
Size: 8.5”x3”x12”,
216mmx76x305mm (WxHxD)
Weight: 9lbs, 4Kg
Features and specifications are subject to improvements and changes
without prior notice.
